Bisazza GL 13 3/4”x 3/4” Glass Mosaic

1 Luxury pedigree
Bisazza is positioned as a top luxury brand and a world leader in glass mosaic for interior and exterior decoration.

2 Designer level credibility
They have worked with internationally renowned designers for more than twenty five years, making the brand a reference point in the design world.

3 Premium visual impact
Glass delivers crisp light play and depth, and Bisazza notes that slight shade variation is a natural part of the product character.

4 Built for statement surfaces
From feature walls to spa environments, many lines are intended for humid and wet areas when installed with the correct system.

5 Pool grade installation systems
They offer a dedicated epoxy installation kit that pairs an epoxy adhesive with epoxy grout for demanding wet and submerged conditions.

6 High performance epoxy grout
Fillgel Plus is positioned as a high performance epoxy grout for glass mosaics, designed for washability, wear resistance, and UV resistance.

7 Technical ecosystem
Bisazza provides purpose built installation products, including pool focused solutions, to support long term performance.

8 Clear care rules that protect the finish
They advise neutral cleaners, abundant rinsing, no hydrofluoric acid or phosphoric acid, no abrasives, and no pressure washing.

9 Authenticity verification
They offer an authenticity verification service to help confirm genuine Bisazza material on high value specifications.

10 Warranty terms
Bisazza warranty language focuses on product conformity to their stated standards, requires prompt defect notice after delivery, and generally limits remedies to replacement of non conforming goods.

• Daily cleaning
  Use neutral household detergents and rinse thoroughly with plenty of clean water
• Acid warning
  Never use cleaners that contain hydrofluoric acid or phosphoric acid
• Heat and sun
  Do not apply any cleaning product on hot surfaces or surfaces exposed to direct sunlight
• No abrasives
  Avoid abrasive powders abrasive pads and abrasive tools that can scratch the glass or dull the finish
• No pressure washing
  Avoid high pressure water jets and do not pressure wash
• Alkaline products
  If you use alkaline detergents do it cautiously and rinse them off quickly with water
• Lime deposits
  For calcium or lime deposits use a mildly acidic detergent only as needed then rinse immediately and repeatedly with clean water
• Avoid wax and oils
  Do not use wax or oily products that can leave film and attract residue in grout joints
• Rinse discipline
  Always finish cleaning with abundant rinsing since leftover cleaner can leave haze or streaks on glossy glass
• Spot test first
  Test any new cleaner on a small inconspicuous area first especially on specialty finishes and blends
• Epoxy grout cleanup
  Clean grout residue promptly during maintenance cycles using clean water and the grout manufacturer method rather than harsh chemicals
• Routine schedule
  Clean more frequently in showers and splash zones to prevent soap buildup and mineral deposits from forming
• Soft tools only
  Use soft cloths or non abrasive sponges to protect the surface sheen and keep edges looking crisp
• Rinse after chemical exposure
  If hair products or pool chemicals contact the surface rinse with water soon after to reduce residue in joints
• When in doubt
  Follow the specific care notes in the product data sheet for your exact Bisazza series since finishes can vary

Bisazza installation guidance expanded summary
Bisazza emphasizes that long term performance starts with professional installation and correct surface preparation for the specific environment. For concrete pools, the base should be compact, cured, dry, and free of dust, grease, and contaminants. They call out ordinary cement curing at about 28 days and a substrate moisture level not exceeding 4 percent. Any weak areas, residues, burrs, or release agents should be removed, exposed steel should be treated, and crumbling sections should be repaired before waterproofing and setting work begins.

Waterproofing and corners
For pool applications, Bisazza describes a workflow that focuses on cleaning and smoothing the surface, sealing voids, addressing spacers and any exposed steel, then plastering and skimming prior to waterproofing layers. They also recommend rounding horizontal and vertical corners where possible to reduce breakage risk, help sheets bond consistently, improve safety, and make waterproofing and cleaning easier.

Why a white setting bed matters
Bisazza notes that the setting surface should be evenly white because glass mosaics can be translucent and the background can influence the final look. They describe skimming as a way to make the surface regular, perfectly smooth, and uniformly white, while clarifying that skimming alone is not a waterproofing step.

Adhesive selection for wet and submerged areas
Bisazza describes Ad Hoc as a high performance white cement adhesive for glass mosaic and recommends it for pools and outdoor use when combined with Ultra latex. For salty water, thermal water, and certain transparent or semi transparent mosaics, they recommend eGlue, a two part epoxy adhesive, and they highlight that epoxy is especially relevant in humid and submerged conditions depending on the mosaic type.

Sheet type for submerged work
For pools and fountains, Bisazza strongly suggests paper faced mosaic, where the paper covers the face and is removed during installation, because it is well suited to submerged conditions.

Movement joints
Bisazza emphasizes that expansion joints must never be covered. Existing joints must be respected and sealed with an elastic sealant rather than filled with grout.

Grouting approach and cure timing
Bisazza recommends Fillgel Plus UVR epoxy grout to avoid uneven or patchy results that can occur with cement grout in demanding environments. They describe epoxy grout as producing a smooth compact surface with uniform color, strong hardness, and strong bonding. They also warn against adding water or solvent to change workability, and they stress accurate mixing with remixing in a clean bucket. Grout timing depends on site temperature and humidity, with a minimum wait of 24 hours and only once the adhesive is fully dry. For pools, they state the pool can be filled 14 days after the installation is finished.

Z-Boutique makes no expressed or implied warranty for any specific end-use application. The customer is solely responsible for determining slip resistance, suitability, and ongoing maintenance requirements of the selected product. All measurements are nominal and subject to typical production variation.

For detailed guidance on care, cleaning, and installation best practices, please consult the Tile Council of North America (TCNA) at www.tcnatile.com or the Natural Stone Institute at naturalstoneinstitute.org.

• Q: How are Bisazza glass mosaics supplied
  A: Typically either on fiberglass mesh attached to the back or on gummed paper attached to the face which is removed during installation
• Q: Can I choose the exact mix of colors on each sheet for a blend
  A: No the blend is calculated by square meter and the placement on sheets is random
• Q: Will the delivered color match the sample exactly
  A: Not always glass production can vary slightly by batch within manufacturing tolerance
• Q: If I reorder the same color later will it match
  A: It can match if you provide the prior batch number and the same batch is still available otherwise a slight shade shift is possible
• Q: Do the tiles have sharp edges
  A: No standard mosaics are beveled or rounded so they are not sharp with special notes for certain artistic hand cut work
• Q: Are paper mounted and mesh mounted versions priced differently
  A: For the same format they are typically priced the same
• Q: Are Bisazza mosaics suitable for pools and humid areas
  A: Many colors are suitable with specific adhesive recommendations for certain transparent and specialty series in wet or submerged settings
• Q: What does the substrate need to be like before installation
  A: It must be flat stable clean and fully dry where required and special preparation is needed for metals fiberglass heated surfaces and wet environments
• Q: Do I need a specialist installer
  A: It is recommended to use an installer experienced with mosaics since the technique differs from standard ceramic tile work
• Q: Can I install over existing tile or cladding
  A: Often yes because mosaic thickness can be very thin but only if the existing surface is stable compact and properly prepared
• Q: How do I orient paper faced sheets and when do I remove the paper
  A: Place the paper facing outward toward the installer and remove it before the adhesive dries and before grouting
• Q: Do epoxy adhesive and epoxy grout fully waterproof the installation
  A: No they do not replace proper waterproofing of the substrate use a dedicated waterproofing system where required
• Q: Why is white adhesive important for glass mosaic
  A: Because glass can be semi transparent and darker adhesives can change the perceived final color
• Q: How do I clean and maintain Bisazza glass mosaic
  A: Use ordinary household cleaners then rinse well avoid abrasive products avoid pressure washing and avoid cleaners containing hydrofluoric acid or phosphoric acid
• Q: How long should I wait before using the area or filling a pool
  A: Minimum cure times vary by system and conditions and for pools guidance includes waiting before filling after installation